Scytek electronic 600 Manuel télécharger pdf (Page 17)

Astra 600 - Page 13

Jumper Selections

Carefully separate the top and bottom halves of the main unit case. Once the cover is removed, the polarity

jumpers will be visible next to the parking light, dome light, and Auxiliary 1 relays. Set the jumpers for the

correct polarity output as described below, then reassembly the main unit case.

Parking Light Output. Selects the polarity (+/-) for the output of the on-board Parking Light relay.

Left Pin + Center Pin = positive

Right Pin + Center Pin = negative

Dome Light Output. Selects the polarity (+/-) for the output of the on-board Illuminated Entry relay.

Left Pin + Center Pin = negative

Right Pin + Center Pin = positive

Auxiliary 1 Output. Selects the polarity (+/-) for the output of the on-board Aux 1 relay.

Left Pin + Center Pin = positive

Right Pin + Center Pin = negative

default settings shown

PARKING LIGHT

DOME LIGHT

2ND CH.

Dome Light

Relay

Parking Light

Relay

Lock Relay

Auxiliary 1

Relay

Jumper SSettings

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 23 24

Pas de commentaire

Scytek electronic 600 Manuel Page 17