Scytek electronic VEHICLE SECURITY SYSTEM A10 Manuel télécharger pdf (Page 6)

Remote Transmitter Description

The Astra A10 is supplied with (2) two-button Remote Transmitters used to control system

operations.

Button 1

Arms and Disarms the system and when held for 2 seconds, activates the system’s Panic

feature. Button 1 also locks and unlocks the doors when the system is in Valet Mode.

Button 2

Arms and Disarms the system silently and when held for 2 seconds or more, activates the

Auxiliary 1 output. This output will remain on for as long as the button is pressed.

Adding/Replacing Transmitters

To replace lost or stolen transmitters or to add additional transmitters into the system, have all

desired transmitters ready and follow the steps below.

Note: Up to 4 transmitters can be programmed to operate the system. To erase any previously

stored transmitter codes, be sure to program all 4 transmitter memory locations.

To program the transmitter(s):

1. Turn on the ignition key On, Off, On, Off, and back On.

· The siren will chirp 3 times.

2. Press and hold the Override switch for 5 seconds.

· The siren will chirp 5 times.

· The LED will illuminate.

3. Press Button 1 on the first transmitter.

· The siren will chirp once.

4. Press Button 1 on the first transmitter again.

· The siren will chirp twice to indicate it has learned the code.

5. Repeat steps 3 and 4 for each transmitter (up to 4).

6. Turn off the ignition key.

Page 2 - Astra A10

Remote

Transmitters

Button 1 Button 2

LED

1 2 3 4 5 6 7 8 9 10 11 ... 19 20

Pas de commentaire

Scytek electronic VEHICLE SECURITY SYSTEM A10 Manuel Page 6